On this page 
Warning:
CockroachDB v20.1 is no longer supported as of November 12, 2021. For more details, refer to the Release Support Policy.
To view details for each node in the cluster, use the cockroach node command with the appropriate subcommands and flags.
The cockroach node command is also used in the process of decommissioning nodes for removal from the cluster. See Decommission Nodes for more details.
Subcommands
| Subcommand | Usage |
|---|---|
ls |
List the ID of each node in the cluster, excluding those that have been decommissioned and are offline. |
status |
View the status of one or all nodes, excluding nodes that have been decommissioned and taken offline. Depending on flags used, this can include details about range/replicas, disk usage, and decommissioning progress. |
decommission |
Decommission nodes for removal from the cluster. See Decommission Nodes for more details. |
recommission |
Recommission nodes that have been decommissioned. See Recommission Nodes for more details. |
drain |
Drain nodes of SQL clients, distributed SQL queries, and range leases, and prevent ranges from rebalancing onto the node. This is normally done by sending SIGTERM during node shutdown, but the drain subcommand provides operators an option to interactively monitor, and if necessary intervene in, the draining process. |
Synopsis
List the IDs of active and inactive nodes:
$ cockroach node ls <flags>
Show status details for active and inactive nodes:
$ cockroach node status <flags>
Show status and range/replica details for active and inactive nodes:
$ cockroach node status --ranges <flags>
Show status and disk usage details for active and inactive nodes:
$ cockroach node status --stats <flags>
Show status and decommissioning details for active and inactive nodes:
$ cockroach node status --decommission <flags>
Show complete status details for active and inactive nodes:
$ cockroach node status --all <flags>
Show status details for a specific node:
$ cockroach node status <node ID> <flags>
Decommission nodes:
$ cockroach node decommission <node IDs> <flags>
Recommission nodes:
$ cockroach node recommission <node IDs> <flags>
Drain nodes:
$ cockroach node drain <flags>
View help:
$ cockroach node --help
$ cockroach node <subcommand> --help
Flags
All node subcommands support the following general-use and logging flags.
General
| Flag | Description |
|---|---|
--format |
How to display table rows printed to the standard output. Possible values: tsv, csv, table, records, sql, html.Default: tsv |
The node ls subcommand also supports the following general flags:
| Flag | Description |
|---|---|
--timeout |
Set the duration of time that the subcommand is allowed to run before it returns an error and prints partial information. The timeout is specified with a suffix of s for seconds, m for minutes, and h for hours. If this flag is not set, the subcommand may hang. |
The node status subcommand also supports the following general flags:
| Flag | Description |
|---|---|
--all |
Show all node details. |
--decommission |
Show node decommissioning details. |
--ranges |
Show node details for ranges and replicas. |
--stats |
Show node disk usage details. |
--timeout |
Set the duration of time that the subcommand is allowed to run before it returns an error and prints partial information. The timeout is specified with a suffix of s for seconds, m for minutes, and h for hours. If this flag is not set, the subcommand may hang. |
The node decommission subcommand also supports the following general flag:
| Flag | Description |
|---|---|
--wait |
When to return to the client. Possible values: all, none.If all, the command returns to the client only after all replicas on all specified nodes have been transferred to other nodes. If any specified nodes are offline, the command will not return to the client until those nodes are back online.If none, the command does not wait for the decommissioning process to complete; it returns to the client after starting the decommissioning process on all specified nodes that are online. Any specified nodes that are offline will automatically be marked as decommissioning; if they come back online, the cluster will recognize this status and will not rebalance data to the nodes.Default: all |
The node drain subcommand also supports the following general flag:
| Flag | Description |
|---|---|
--drain-wait |
Amount of time to wait for the node to drain before returning to the client. Default: 10m |
Client connection
| Flag | Description |
|---|---|
--host |
The server host and port number to connect to. This can be the address of any node in the cluster. Env Variable: COCKROACH_HOSTDefault: localhost:26257 |
--port-p |
The server port to connect to. Note: The port number can also be specified via --host. Env Variable: COCKROACH_PORTDefault: 26257 |
--user-u |
The SQL user that will own the client session. Env Variable: COCKROACH_USERDefault: root |
--insecure |
Use an insecure connection. Env Variable: COCKROACH_INSECUREDefault: false |
--certs-dir |
The path to the certificate directory containing the CA and client certificates and client key. Env Variable: COCKROACH_CERTS_DIRDefault: ${HOME}/.cockroach-certs/ |
--url |
A connection URL to use instead of the other arguments. Env Variable: COCKROACH_URLDefault: no URL |
See Client Connection Parameters for more details.
Logging
By default, the node command logs errors to stderr.
If you need to troubleshoot this command's behavior, you can change its logging behavior.
Response
The cockroach node subcommands return the following fields for each node.
node ls
| Field | Description |
|---|---|
id |
The ID of the node. |
node status
| Field | Description |
|---|---|
id |
The ID of the node. Required flag: None |
address |
The address of the node. Required flag: None |
build |
The version of CockroachDB running on the node. If the binary was built from source, this will be the SHA hash of the commit used. Required flag: None |
locality |
The locality information specified for the node. Required flag: None |
updated_at |
The date and time when the node last recorded the information displayed in this command's output. When healthy, a new status should be recorded every 10 seconds or so, but when unhealthy this command's stats may be much older. Required flag: None |
started_at |
The date and time when the node was started. Required flag: None |
replicas_leaders |
The number of range replicas on the node that are the Raft leader for their range. See replicas_leaseholders below for more details.Required flag: --ranges or --all |
replicas_leaseholders |
The number of range replicas on the node that are the leaseholder for their range. A "leaseholder" replica handles all read requests for a range and directs write requests to the range's Raft leader (usually the same replica as the leaseholder). Required flag: --ranges or --all |
ranges |
The number of ranges that have replicas on the node. Required flag: --ranges or --all |
ranges_unavailable |
The number of unavailable ranges that have replicas on the node. Required flag: --ranges or --all |
ranges_underreplicated |
The number of underreplicated ranges that have replicas on the node. Required flag: --ranges or --all |
live_bytes |
The amount of live data used by both applications and the CockroachDB system. This excludes historical and deleted data. Required flag: --stats or --all |
key_bytes |
The amount of live and non-live data from keys in the key-value storage layer. This does not include data used by the CockroachDB system. Required flag: --stats or --all |
value_bytes |
The amount of live and non-live data from values in the key-value storage layer. This does not include data used by the CockroachDB system. Required flag: --stats or --all |
intent_bytes |
The amount of non-live data associated with uncommitted (or recently-committed) transactions. Required flag: --stats or --all |
system_bytes |
The amount of data used just by the CockroachDB system. Required flag: --stats or --all |
is_available |
If true, the node is currently available.Required flag: None |
is_live |
If true, the node is currently live. For unavailable clusters (with an unresponsive Admin UI), running the node status command and monitoring the is_live field is the only way to identify the live nodes in the cluster. However, you need to run the node status command on a live node to identify the other live nodes in an unavailable cluster. Figuring out a live node to run the command is a trial-and-error process, so run the command against each node until you get one that responds. See Identify live nodes in an unavailable cluster for more details. Required flag: None |
gossiped_replicas |
The number of replicas on the node that are active members of a range. After the decommissioning process completes, this should be 0. Required flag: --decommission or --all |
is_decommissioning |
If true, the node's range replicas are being transferred to other nodes. This happens when a live node is marked for decommissioning.Required flag: --decommission or --all |
is_draining |
If true, the node is being drained of in-flight SQL connections, new SQL connections are rejected, and the /health?ready=1 monitoring endpoint starts returning a 503 Service Unavailable status. This happens when a live node is being stopped.Required flag: --decommission or --all |
node decommission
| Field | Description |
|---|---|
id |
The ID of the node. |
is_live |
If true, the node is live. |
replicas |
The number of replicas on the node that are active members of a range. After the decommissioning process completes, this should be 0. |
is_decommissioning |
If true, the node's range replicas are being transferred to other nodes. This happens when a live node is marked for decommissioning. |
is_draining |
If true, the node is being drained of in-flight SQL connections, new SQL connections are rejected, and the /health?ready=1 monitoring endpoint starts returning a 503 Service Unavailable status. This happens when a live node is being stopped. |
node recommission
| Field | Description |
|---|---|
id |
The ID of the node. |
is_live |
If true, the node is live. |
replicas |
The number of replicas on the node that are active members of a range. After the decommissioning process completes, this should be 0. |
is_decommissioning |
If true, the node's range replicas are being transferred to other nodes. This happens when a live node is marked for decommissioning. |
is_draining |
If true, the node is being drained of in-flight SQL connections, new SQL connections are rejected, and the /health?ready=1 monitoring endpoint starts returning a 503 Service Unavailable status. This happens when a live node is being stopped. |
Examples
Setup
To follow along with the examples, start an insecure cluster, with localities defined.
List node IDs
$ cockroach node ls --insecure
id
+----+
1
2
3
(3 rows)
Show the status of a single node
$ cockroach node status 1 --host=localhost:26257 --insecure
id | address | sql_address | build | started_at | updated_at | locality | is_available | is_live
+----+-----------------+-----------------+-----------------------------------------+----------------------------------+---------------------------------+---------------------+--------------+---------+
1 | localhost:26257 | localhost:26257 | v19.2.0-alpha.20190606-2479-gd98e0839dc | 2019-10-01 20:04:54.308502+00:00 | 2019-10-01 20:05:43.85563+00:00 | region=us-east,az=1 | true | true
(1 row)
Show the status of all nodes
$ cockroach node status --host=localhost:26257 --insecure
id | address | sql_address | build | started_at | updated_at | locality | is_available | is_live
+----+-----------------+-----------------+-----------------------------------------+----------------------------------+----------------------------------+------------------------+--------------+---------+
1 | localhost:26257 | localhost:26257 | v19.2.0-alpha.20190606-2479-gd98e0839dc | 2019-10-01 20:04:54.308502+00:00 | 2019-10-01 20:06:15.356886+00:00 | region=us-east,az=1 | true | true
2 | localhost:26258 | localhost:26258 | v19.2.0-alpha.20190606-2479-gd98e0839dc | 2019-10-01 20:04:54.551761+00:00 | 2019-10-01 20:06:15.583967+00:00 | region=us-central,az=2 | true | true
3 | localhost:26259 | localhost:26259 | v19.2.0-alpha.20190606-2479-gd98e0839dc | 2019-10-01 20:04:55.178577+00:00 | 2019-10-01 20:06:16.204549+00:00 | region=us-west,az=3 | true | true
(3 rows)
Identify live nodes in an unavailable cluster
The is_live and is_available fields are marked as true as long as a majority of the nodes are up, and a quorum can be reached:
$ cockroach quit --host=localhost:26258 --insecure
$ cockroach node status --host=localhost:26257 --insecure
id | address | sql_address | build | started_at | updated_at | locality | is_available | is_live
+----+-----------------+-----------------+-----------------------------------------+----------------------------------+----------------------------------+------------------------+--------------+---------+
1 | localhost:26257 | localhost:26257 | v19.2.0-alpha.20190606-2479-gd98e0839dc | 2019-10-01 20:04:54.308502+00:00 | 2019-10-01 20:07:04.857339+00:00 | region=us-east,az=1 | true | true
2 | localhost:26258 | localhost:26258 | v19.2.0-alpha.20190606-2479-gd98e0839dc | 2019-10-01 20:04:54.551761+00:00 | 2019-10-01 20:06:48.555863+00:00 | region=us-central,az=2 | false | false
3 | localhost:26259 | localhost:26259 | v19.2.0-alpha.20190606-2479-gd98e0839dc | 2019-10-01 20:04:55.178577+00:00 | 2019-10-01 20:07:01.207697+00:00 | region=us-west,az=3 | true | true
(3 rows)
If a majority of nodes are down and a quorum cannot be reached, the is_live field is marked as true for the nodes that are up, but the is_available field is marked as false for all nodes:
$ cockroach quit --host=localhost:26259 --insecure
$ cockroach node status --host=localhost:26257 --insecure
id | address | sql_address | build | started_at | updated_at | locality | is_available | is_live
+----+-----------------+-----------------+-----------------------------------------+----------------------------------+----------------------------------+------------------------+--------------+---------+
1 | localhost:26257 | localhost:26257 | v19.2.0-alpha.20190606-2479-gd98e0839dc | 2019-10-01 20:04:54.308502+00:00 | 2019-10-01 20:07:37.464249+00:00 | region=us-east,az=1 | false | true
2 | localhost:26258 | localhost:26258 | v19.2.0-alpha.20190606-2479-gd98e0839dc | 2019-10-01 20:04:54.551761+00:00 | 2019-10-01 20:07:37.464259+00:00 | region=us-central,az=2 | false | false
3 | localhost:26259 | localhost:26259 | v19.2.0-alpha.20190606-2479-gd98e0839dc | 2019-10-01 20:04:55.178577+00:00 | 2019-10-01 20:07:37.464265+00:00 | region=us-west,az=3 | false | false
(3 rows)
Note:
You need to run the node status command on a live node to identify the other live nodes in an unavailable cluster. Figuring out a live node to run the command is a trial-and-error process, so run the command against each node until you get one that responds.
Decommission nodes
Recommission nodes
See also
Was this helpful?
